Architects and designers

Please click on the relevant button below for more information.

Icon
Jemiclad CSI Specifications
Mechanical PropertiesStandardUnitValue
Apparent DensityDIN EN ISO 1183g/cm3-1.43
Yield Stress (tensile strength)DIN EN ISO 527MPa>= 55
Elongation at tearDIN EN ISO 527%>= 15
Flexural strengthDIN EN ISO 178MPa>= 80
Compressive StrengthDIN EN ISO 844MPa>= 70
Modulus of elasticityDIN EN ISO 527-2/1A/50MPa>= 3000
Notched Impact StrengthDIN EN ISO 179-1 @PAKJ/M2>= 4
Impact StrengthDIN EN ISO 179KJ/M2
0℃/32℉No Failure
Ball indentation hardnessDIN EN ISO 2039W/mK-100
Thermal PropertiesStandardUnitValue
Vicat softening temperatureDIN EN ISO 306 (Process B50)

>= 75

>= 167
Deflection temperatureDIN EN ISO 75

>= -68

>= -154
Coefficient of linear thermal expansion

from -30℃/-22℉ to 50℃/+122℉
DIN EN A1359 (process Ae)mm/mK0.08
Thermal conductivity

from 0℃/32℉ to 60℃/122℉
DIN EN ISO 22007W/mK0.16
Electrical PropertiesStandardUnitValue
Dielectric constant Er (at 1kHz)VDE 0303 T43.4
Dielectric loss factor tan δ (at 1kHz)VDE 0303 T40.016
Surface resistanceDIN VDE 03030 T30 DIN IEC 93Ω>= 1015
Volume resistivityDIN VDE 03030 T30 DIN IEC 93Ω - m>=1014
Dielectric strengthDIN VDE 03030 T21 1mm sheetKV/mm>= 23
Tracking resistanceDIN IEC 112LevelCTI 600
Arc resistanceDIN VDE 0303 TSIndex2.2.2.2
Other PropertiesStandardUnitValue
Water absorption after 7 daysDIN EN ISO 62%<0.08
Fire behaviour: surface spread of flameBS 476 Part 7 (1987)Class 1

Class 1Y
1-4mm

2.5-3 mm
Fire behaviour: fire propagationBS 476 Part 6 (1989)Class 0
Fire behaviourDIN 4102 (DE)

NF P 92-501 (FR)

USA - ASTM E84 Class A

CAN - Can/UCL-S102.2

UL 94 (USA)
B1

M1

M2



V0/5VB
1-3 mm

1.3-8 mm

10-30 mm



1-30 mm
Physiological assessmentGenerally recognised as safe
Chemical Resistance
SymbolValueWeight difference
++good resistanceunder 1%
+resistant1-5%
0partially resistant5-10%
-non-resistantn/a
Medium Organic ChemicalsConcentrationTemperature 20℃Temperature 60℃
Formic acid10%++++
Formic acid100%+++
Aniline---
Ethanol-+++
Benzine-benzene mixture (BV-Aral)---
Benzene---
Butanol-++++
Cyclohexane-+++
Cyclohexanol-++++
Decalin-++++
Diesel fuel-++-
Diethyl ether---
Pure acetic acid-++-
Acetic acid10%++++
Formaldehyde-+++
Glycol-++++
Fuel oil-++k.A.
Heptane-++-
Hexane-++++
M-cresol-+-
White spirit-++0
Machine oil-++++
Methanol-+++
Olive oil-++++
Petroleum ether-+++
Turpentine-++0
Toluene oil---
Transformer oil-++++
Xylene---
Medium Inorganic ChemicalsConcentrationTemperature 20℃Temperature 60℃
Ammonia24%++-
Chromosulphuric acid-++0
Potash lye10%++++
Aqua regia-++0
Sodium chlorite40%++++
Sodium dithionite10%++++
Sodium hypochlorite40%++++
Soda lye10%++++
Soda lye40%++++
Phosphoric acid10%++++
Phosphoric acid95%++++
Nitric acid10%++++
Hydrochloric acid10%++++
Hydrochloric acid35%++++
Sulphuric acid10%++++
Sulphuric acid96%++++